Low dust
Tested in accordance with DIN EN 15051-3.
DEContact 
TERRABOND hybrid paving joint
Polymer jointing material.
Depending on the product type, suitable for joints from 2 mm in unbound construction. Ready to use, swept in dry and activated with water.
3 product typesJoint widths from 2 mm7 standard colours
01The solution
For new and existing surfaces with unbound construction.
Mineral aggregate and polymer binder.
TERRABOND consists of graded mineral aggregates, polymer binder and additional formulation components. After sweeping in and compacting, the material is activated with water.
Product properties
Product properties
Firm.
Flexible.
Ready to use
No mixing: sweep in, compact, sweep clean, water and finish.
Rainproof and walkable after 3 hours
Permanently flexible
Consistently filled joints.
Resists washout
Clean paved surfaces.
Inhibits weed growth
Attractive paved surfaces.
Easy installation
Simple to clean.
No binder film
Natural appearance.
Frost-resistant and water-permeable
For new construction and refurbishment
Available in seven standard colours
02Product selection
Three types by
joint width.
TERRABOND 701, 705 and 725 are designed for different joint widths from 2 mm. Selection depends on the paving material, joint geometry and construction.
Technical advice
Illustrative image · Stone GreyTERRABOND70101Joint width 2–12 mm
Grain size up to 1 mm
Grain size up to 1 mm
For narrow joints
Concrete pavers, clay pavers, sawn natural stone and slabs
Product enquiry
Illustrative image · Stone GreyTERRABOND70502Joint width 8–30 mm
Grain size up to 2.5 mm
Grain size up to 2.5 mm
For medium-width joints
Concrete pavers, clay pavers, natural stone and slabs
Product enquiry
Illustrative image · Stone GreyTERRABOND72503Joint width from 12 mm
Grain size up to 5 mm
Grain size up to 5 mm
For wide joints
Natural stone, small-sett and large-sett paving
Product enquiryApplications
Private, commercial and
public paved surfaces.
Landscaping
For driveways, paths, patios and other paved surfaces with unbound construction.
Municipalities & maintenance depots
For pedestrian zones, market squares, parking areas and municipal paths.
Planning & specialist trade
Product selection, technical information and material requirements for project planning.
03Installation
Installation in
six steps.
Sweep in dry, compact evenly, top up the joints, sweep the surface clean, activate the binder with water and allow it to dry completely.
Sweep in the dry material
Spread ready-to-use TERRABOND over the dry surface and sweep it into the joints.
Compact evenly
Compact the surface thoroughly and check compaction with the finger test.
Top up the joints
Sweep in more material to the specified fill level and compact again.
Sweep the surface clean
Remove all material residue from the surface of the paving.
Activate the binder
Saturate the jointing material with clean water throughout the full joint depth.
Allow to dry – finished
Allow the surface to dry completely.
04Application examples
Paved surfaces and
application examples.
Illustrative examples of possible applications and photographs of completed paved surfaces.
Product documents
Technical information.
Enquiries and product selection
Technical advice
and quotations.
We supply construction companies, landscapers, municipalities and builders’ merchants directly from our works.
Direct contact
+49 4563 471 98 22service@rost-systembaustoffe.deSend enquiry Private customers can find samples and material in the POLYSAND online shop.